← Back to exam page

300-365 – Deploying Cisco Wireless Enterprise Networks

Loading demo links...

Showing 4–6 of 10 questions

Question 4

Which two methods to discover a controller does a MAP attempt when it boots up? (Choose two.)

Select all that apply, then click Submit answer.

  • ○

    If Ethernet and wireless are available, it attempts to discover only via Ethernet.
  • ○

    If Ethernet is disconnected, it attempts to connect wirelessly using AWPP.
  • ○

    If only wireless is available and it is configured as a MAP, it does not attempt to connect to a WLC.
  • ○

    If Ethernet and wireless are available, it uses Ethernet first. If it cannot connect via Ethernet, then it chooses wireless.
  • ○

    If Ethernet is disconnected, it attempts to connect wirelessly using the configured DHCP option.
Question 5

A security engineer wants all guest users to be terminated in the DMZ of their firewall. Which two configurations must be implemented to fulfill this new requirement? (Choose two.)

Select all that apply, then click Submit answer.

  • ○

    TCP port 16666 and 16113 in an ACL on the controller
  • ○

    UDP ports 16666 and IP protocol 97 on the firewall
  • ○

    a mobility group with a controller in an isolated network on the firewall
  • ○

    an RF group with a controller in an isolated network on the firewall
  • ○

    UDP ports 1812 and 1645 in an ACL on the controller
Question 6

After a wireless deployment, users report that wireless voice clients are experiencing an unacceptable amount of delay while roaming during a call on the Cisco Unified 7925 Series phones. The customer environment consists of multiple controllers, all running 7.4.121.0 code, operating in a centralized deployment. What configuration issue is most likely contributing to the problem?

Select an option, then click Submit answer.

  • ○

    The authentication should be set to WPA2-PSK to allow for 802.11n speeds for the Cisco Unified 7925 phones.
  • ○

    The access points on that floor are all on one controller and should be load balanced evenly across multiple controllers.
  • ○

    The access points for that floor are salt and peppered across multiple controllers and should be moved to the primary controller.
  • ○

    The wireless phones are operating in the 2.4 GHz band and should be configured for the 5 GHz band.