← Back to exam page

150-130 – Brocade Certified Network Engineer 2012

Loading demo links...

Showing 7–9 of 10 questions

Question 7

A powered device connected to a Brocade FastIron device has been auto discovered and classified as a class-3 PoE device. However, its power consumption is only 10 watts. Which command would be used on the FastIron to reallocate power back to the available power budget, while still providing all the necessary power to the powered device?

Select an option, then click Submit answer.

  • ○

    no legacy-inline-power
  • ○

    inline power power-by-class 2
  • ○

    inline power priority 2
  • ○

    inline power power-limit 11000
Question 8

You want to classify and mark traffic at the edge of your network before it is sent to the core and routed where Layer 3 QoS is trusted and enabled. Which type of marking should you configure to ensure your application traffic is serviced correctly in the core of your network?

Select an option, then click Submit answer.

  • ○

    Mark the 802.lp field according to application priority
  • ○

    Mark the PCP field according to application priority
  • ○

    Mark the EXP field according to application priority
  • ○

    Mark the DSCP field according to application priority
Question 9

What does the command copy flash tftp 192.168.13.37 FGSR07001.bin secondary do?

Select an option, then click Submit answer.

  • ○

    It copies the code contained in the secondary flash partition to a TFTP server located at 192.168.13.37.
  • ○

    It copies the configuration contained in the secondary flash partition to a TFTP server located at 192.168.13.37.
  • ○

    It copies the code contained on a TFTP server located at 192.168.13.37 to the secondary flash partition.
  • ○

    It copies the configuration contained on a TFTP server located at 192.168.13.37 to the secondary flash partition.